Description
The SENSORWORX phase dimmer provides manual dimming control of 120V lightingfrom a single location. With no minimum load requirements, this stand alone dimmeris perfect for any lighting zone. Additionally, at less than one inch deep, the unit issignificantly shallower than typical dimmers. This results in less crowded wall boxesand quicker installation. All SENSORWORX products are proudly made in the USA.
Features:
- Dims LED, ELV, CFL, & Incandescent Lighting Loads
- Selectable Reverse (default) and Forward Phase Dimming in Same Unit
- No Minimum Load Ratings – Relay Based Switching
- Overload Protection Monitors & Protects Unit from Overheating
- Enclosure is 25-40% Shallower than Other Dimmers (< 1” Depth into Wallbox)
- Modern Look and Individual Easy-Tap Buttons for On, Off, Raise, & Lower
- Matches Styling of other SWX Wall Devices
- Self-Grounding Mounting Strap
- Blue Locator LED when Lights are Off
- White LED Indicator Changes Intensity as Dim Level is Adjusted
- Configurable Dimming Parameters including High/Low Trims, & Turn on Levels
- Programmable Dimming Curves
- Settings are Adjustable without Removing Cover Plate
- Unit Retains Level Setting after Power Outage
This phase dimmer is not designed for installation or usage in multiway (e.g. 3-way) applications. For dimming in those applications, the SENSORWORX wireless phase dimmer (model series SWX-874) and a wireless companion dimmer (model series SWX-854) is required.
NOTE: above picture shows a white model switch, while this particular model comes in a white finish
Wall plates sold separately
SensorWorx is committed to 100% USA based manufacturing
Reviews
There are no reviews yet.